Thermo-Dip® Thermocouple

Non-Ferrous Foundry Thermocouples

Thermo-Dip thermocouples are designed for intermittent temperature sensing below 2300°F (1255°C), for use in molten brass, copper, aluminum, lead and other non-ferrous metals. The 446 SS sheath (0.500″ OD) protects a 16 gage ANSI Type K thermocouple. Insulated at the hot end with double bore ceramic insulators and fiberglass sleeving at the cold end. Interchangeable with other makes.

Thermo-Dip^® Holder

The Thermo-Dip holder is constructed of a stainless steel tube with reinforced thermoset molded grip. Thermocouple installs in stainless steel sleeve with two stainless set screws. Removing one half of grip exposes terminals for easy thermocouple replacement. Interchangeable with other makes.

Curved holder is available in lengths of 43″, 55″, 72″ and 96″. Straight holder is available in 31″ length only.

Armored Extension Cable

Connects the Thermo-Dip holder to wall mounted instrument. Flexible armor protects 16 ga. Type KX extension wire; strain relief springs provide extra protection at each end.

Available in lengths from 5 feet.

Thermo-Dip Holder for Digital Foundry Thermicator

The Thermo-Dip holder is constructed of a stainless steel tube and box with reinforced thermoset molded grip. Thermocouple installs in stainless steel sleeve with two stainless set screws. Removing one half of grip exposes terminals for easy thermocouple replacement. Thermicator 819-K indicator slides into holder for fast dependable connections.