• Home
  • Company Profile
  • Catalog
  • Products
    • Accessories
      • Instruments
      • Protecting Tubes
      • Thermowells
    • Connectors and Stripanels
    • Sensors
    • Thermocouple Wire
    • New Products
    • Obsolete Products
  • Quality
  • Metrology
  • Request A Quote
  • Contact Us
Marlin Manufacturing Marlin Manufacturing Marlin Manufacturing Marlin Manufacturing
  • Home
  • Company Profile
  • Catalog
  • Products
    • Accessories
      • Instruments
      • Protecting Tubes
      • Thermowells
    • Connectors and Stripanels
    • Sensors
    • Thermocouple Wire
    • New Products
    • Obsolete Products
  • Quality
  • Metrology
  • Request A Quote
  • Contact Us

Insulation Types - Fiberous

Home Thermocouple Wire Insulation Types – Fiberous
TypeSynthetic fiber insulation is bulky because of the heavy application of the fiber. Used for extension grade wire, it can take rough handling. Not for use in conduits. Binder burn-off above 400°F (204°C)Wrapped glass is used only on the single conductors. Usually used on the smaller gage wires because it is easier to strip without fraying. For thermocouple grade wire only. Binder burn-off above 400°F (204°C)Braided glass is used on singles and for all jackets. Glass will not burn at any temperature but will melt if over temperature. Any burn-off is due to binders and colorings. Has very high tensil strength. Binder burn-off above 400°F (204°C)High-Temp glass extends the upper utilization temperature of fiberglass. Although higher in cost it is better suited for the aluminum industry than glass. Used with jacket or as twisted singles. Binder burn-off above 400°F (204°C)Refrasil is a vitreous silica fiber that is higher in cost than High-Temp glass. Not as strong as glass but is utilized at higher temperatures. The FEP sizing can leave a residue when burned off under vacuum or restrictive atmospheres.Ceramic fiber is designed for extreme temperature applications. Extremely high in cost. Should not be used in closed tubes. Has an abrasive feel when handling. Use appropriate protection when handling.
FlexibilityGood Good GoodGoodGoodGood
Moisture ResistanceFairFairFairFairFairFair
Abrasion ResistanceGood FairFairFairFairFair
ANSI/ASTM Color CodeYesYesYesYes by TracerNoNo
Temperature Rating Continuous500°F (260°C)900°F (482°C)900°F (482°C)1300°F (704°C)1600°F (871°C)2200°F (1205°C)
Single Reading650°F (343°C)1000°F(538°C)1000°F (538°C) 1600°F (871°C)2000°F (1093°C) 2400°F (1315°C)
Mfg. MethodBraided Silicone BinderWrapped Silicone BinderBraided Silicone BinderBraided Silicone BinderBraided FEP SizingBraided
DescriptionSynthetic Fiber FiberglassFiberglassHigh-Temp FiberglassRefrasil Silica FiberCeramic Fiber
Insulation CodeSWGHRC
SS Clean KX 16 SS40 | Marlin Manufacturingwirefiberw | Marlin ManufacturingGG Clean | Marlin ManufacturingHH Clean K 24 HH40 | Marlin ManufacturingRR Clean KXF 28 rRR40 | Marlin ManufacturingCC Clean K 16 CC40 | Marlin Manufacturing
Contact us today for a quote Contact

Temperature Instrumentation
for Research and Industry

© 2025 - Marlin Manufacturing | Powered by InUnison LTD

  • Home
  • Company Profile
  • Catalog
  • Products
    • Accessories
      • Instruments
      • Protecting Tubes
      • Thermowells
    • Connectors and Stripanels
    • Sensors
    • Thermocouple Wire
    • New Products
    • Obsolete Products
  • Quality
  • Metrology
  • Request A Quote
  • Contact Us