Full-Size, Jab-in, 2-Pole Connectors

ONE-PIECE CONSTRUCTION

• Molded completely in one piece, Jab-In® connectors eliminate terminal cap and fasteners. There are no loose parts to fumble or lose.
• Twin molded-in channels allow user to jab in wires for quick, reliable hook-up. Wires can be installed or removed in seconds.
• Prongs and inserts are permanently mounted; provide dependable screw connection to extension wires.

RECESSED TERMINAL SCREWS

• Terminals screws are exposed for fastest, easiest access to connections. Deeply recessed in terminal body, screws are out of the way and protected from mechanical damage.
• Large head screws hold connections tight on stranded or solid wire without damaging the wire, exclusive Jab-In® construction eliminates the need to turn down ends.
• Accommodates wire sizes from 14 gauge stranded to 32 gauge inclusive. 8 ga. also available (see Note 1).
• Alloys of prongs and inserts match ANSI calibrations to maintain sensing accuracy. Alloy and polarity are identified by symbols molded into body.
• Connector bodies molded of glass filled thermoset compounds (will not melt) for high strength and dependability. The color coded Connectors will withstand ambient temperatures to 400°F (205°C) continuous and 500°F (260°C) intermittent. High-Temperature Connectors (all Hi-Temp connectors are color coded red) will withstand ambient temperatures to 800°F (425°C) continuous and 1000°F (540°C) intermittent.
• Inserts are spring loaded collet type to assure positive full contact with the negative insert larger making it virtually impossible to mismate.

* – Tubular Pin Availability: J,K,T,N,E,R,S,U, also “C”
† – Solid Pin Availability: J,K,T,E,R,S,U
Note 1 – For connectors that will accept 8 ga. add suffix “8” e.g. 1064-K-8
8 ga. units will not accept smaller ga; not available in solid pin or Hi-Temp

MOUNTING HARDWARE FOR FULL SIZE, 2-POLE, JAB-IN® CONNECTOR

• Nickel Plated Steel Construction
• All screws mount from top into threaded bottom plate (no loose nuts).

* – Specify Size Code: 000(Blank – No nut or ferrule), 040 (0.040″), 062 (0.062″), 125 (0.125″), 187 (0.187″), 250 (0.250″), 312 (0.312″), 375 (0.375″)