Non-Ferrous Foundry Thermocouples
Thermo-Dip thermocouples are designed for intermittent temperature sensing below 2300°F (1255°C), for use in molten brass, copper, aluminum, lead and other non-ferrous metals. The 446 SS sheath (0.500″ OD) protects a 16 gage ANSI Type K thermocouple. Insulated at the hot end with double bore ceramic insulators and fiberglass sleeving at the cold end. Interchangeable with other makes.
|PROBE LENGTHS||FOR HOLDER LENGTHS|
|43" Part No.||55" Part No.||72" Part No.||96" Part No.|
The Thermo-Dip holder is constructed of a stainless steel tube with reinforced thermoset molded grip. Thermocouple installs in stainless steel sleeve with two stainless set screws. Removing one half of grip exposes terminals for easy thermocouple replacement. Interchangeable with other makes.
Curved holder is available in lengths of 43″, 55″, 72″ and 96″. Straight holder is available in 31″ length only.